1. What is an optical fiber adapter? Fiber optic adapter (also known as fiber optic coupler), also called fiber optic connector, is the centering connection part of fiber optic connector. Optical fiber adapters are the most widely used optical passive compon……

Telhua's optical fiber jumpers are used to make jumpers from equipment to fiber wiring links. There is a thicker protective layer, which is generally used for the connection between the optical transceiver and the fiber optic terminal box.

As a member of the optical communications industry, you must remember the wave of the sharp drop in the price of ceramic ferrules in 2016.  That year, as the construction of fiber to the home and 4G mobile base stations in China came to an end, the price of ceramic ferrules dropped from nearly 1 yuan/piece in January 2016 to 0.5 yuan/piece at the end of 2016.

The optical fiber patch panel makes the termination of optical fiber cables easy to manage. It is mainly used for the introduction of optical cables, cross-connection of optical fibers, storage of optical fiber jumpers, wiring output, etc., which can realize……

The intensity of the optical signal received by the optical receiving device needs to be within a certain range, and the optical power cannot be too strong or too weak, otherwise the life of the device will be shortened or it will not work properly. The optical fiber attenuator is an optical passive device that can be used to reduce the energy of the optical signal and attenuate the input optical power to avoid distortion of the optical receiver due to the super strong input optical power.

Fiber optic patch cords can be divided into simplex and duplex according to the working mode of the interface. What is difference between simplex and duplex? Both simplex and duplex are two modes of communication channels in telecommunications and computer n……

Telhua presents a new range of optical passive products for FTTh networks, complete with: rosettes and wall sockets, wall boxes, ODF: fiber optic termination box rack mount, overhead distribution boxes, patch cords and pigtails, adapters, attenuators and dividers, passives Fully assembled PoC / PoP solutions, cabinets and bedside optics.

Indoor Fiber Termination Boxes are excellent for providing security to fiber optic pigtails and splices and allowing distribution. Cablix Termination Boxes are mainly used in industrial equipment rooms and telecommunications network.

What you should know is that after the Optical Connection Node and the Mutualization Point, the Fiber Connection Box is the last link in the chain in an optical fiber network. It is a small box installed in your home. And on which you will connect your box. The fiber optic signal will then be transformed into an electrical signal via an ONT (Optical Network Termination) to allow you to have Very High Speed ​​Internet thanks to the optical fiber.

If you're in the market for a Network Rack Cabinet and are trying to decide on which is best for you this guide is for you. Here we will endeavor to give you some clarity on how they work and which ones are best suited for particular situations.